If a disaster catches you without a stored supply of clean water, you may use water in your hot-water tank, plumbing, and ice cubes. As a last resort, water in the reservoir tank of your toilet (not the bowl) may be use after it is purified.
Water beds hold up to 400 gallons, but some water beds contain toxic chemicals that are not fully removed by many purifiers. If you designate a water bed in your home as an emergency resource, drain it yearly and refill it with fresh water containing two ounces of bleach per 120 gallons.
Pipes or Hot-Water Tanks
To use the water in your pipes, let air into the plumbing by turning on the highest faucet in your house and draining the water from the lowest one.
To use the water in your hot-water tank, be sure the electricity or gas is off, and open the drain at the bottom of the tank. Start the water flowing by turning off the water intake valve and turning on a hot-water faucet. Do not turn on the gas or electricity when the tank is empty.
Incoming Water Valve
Do you know the location of your incoming water valve? If you hear reports of broken water or sewage lines, you'll need to shut off the incoming water to stop contaminated water from entering your home .
EMERGENCY FOOD & WATER SUPPLY EMERGENCY MANAGEMENT HOME
EMERGENCY MANAGEMENT SITE MAP